 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DCX (xxxx) K COMPLEMENTARY NPN/PNP PRE-BIASED SMALL SIGNAL SC-74R DUAL SURFACE MOUNT TRANSISTOR Features NEW PRODUCT * * Epitaxial Planar Die Construction Built-In Biasing Resistors A SC-74R Dim A BC Min 0.35 1.50 2.70 Max 0.50 1.70 3.00 0.95 1.90 Typ 0.38 1.60 2.80 Mechanical Data * * * * * * * * Case: SC-74R, Molded Plastic Case material - UL Flammability Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020A Terminals: Solderable per MIL-STD-202, Method 208 Terminal Connections: See Diagram Marking: Date Code and Marking Code (See Diagrams & Page 4) Weight: 0.015 grams (approx.) Ordering Information (See Page 3) G H K B C D G M H J K L M a 2.90 1.00 0.35 0.10 0 3.10 1.30 0.55 0.20 8 3.00 0.05 1.10 0.40 0.15 3/4 0.013 0.10 J D L All Dimensions in mm P/N DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK R1 22KW 47KW 10KW 2.2KW 10KW 4.7KW 10KW R2 22KW 47KW 47KW 47KW 10KW - MARKING C17 C20 C14 C06 C13 C07 C12 R1 R 2 R2 R1 R1 R1 R1, R2 R1 Only SCHEMATIC DIAGRAM Maximum Ratings NPN Section Characteristic Supply Voltage, (3) to (1) Input Voltage, (2) to (1) @ TA = 25C unless otherwise specified Symbol VCC Value 50 -10 to +40 -10 to +40 -6 to +40 -5 to +12 -10 to +40 -5 Vmax -5 Vmax 30 30 70 100 50 100 100 100 300 416.7 -55 to +150 Unit V DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK All VIN V Output Current IO mA Output Current Power Dissipation (Total) Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage and Temperature Range Note: IC (Max) Pd RqJA Tj, TSTG mA mW C/W C 1. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. 2. 200mW per element must not be exceeded. DS30350 Rev. 2 - 2 1 of 8 DCX (xxxx) K Maximum Ratings PNP Section @ TA = 25C unless otherwise specified Symbol VCC Value 50 +10 to -40 +10 to -40 +6 to -40 +5 to -12 +10 to -40 +5 Vmax +5 Vmax -30 -30 -70 -100 -50 -100 -100 -100 300 833 -55 to +150 Unit V NEW PRODUCT Characteristic Supply Voltage, (3) to (1) Input Voltage, (2) to (1) DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK All VIN V Output Current IO mA Output Current Power Dissipation (Total) Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage and Temperature Range Note: IC (Max) Pd RqJA Tj, TSTG mA mW C/W C 1. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. Electrical Characteristics NPN Section @ TA = 25C unless otherwise specified Characteristic (DDC143TK & DDC114TK only) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector-Emitter Saturation Voltage DC Current Transfer Ratio Input Resistor (R1) Tolerance Gain-Bandwidth Product* Characteristic DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE DR1 fT Min 50 50 5 3/4 3/4 3/4 100 -30 3/4 Typ 3/4 3/4 3/4 3/4 3/4 3/4 250 3/4 250 Min 0.5 0.5 0.3 0.5 0.5 Max 3/4 3/4 -0.5 0.5 0.3 600 +30 3/4 Typ 1.1 1.1 3/4 3/4 1.1 1.9 1.9 --1.9 Unit V V V mA mA V 3/4 % MHz Max 3/4 V Unit Test Condition IC = 50mA IC = 1mA IE = 50mA VCB = 50V VEB = 4V IC/IB = 2.5mA / 0.25mA IC/IB = 1mA / 0.1mA 3/4 VCE = 10V, IE = -5mA, f = 100MHz Test Condition DCX143TK DCX114TK IC = 1mA, VCE = 5V Symbol Vl(off) VCC = 5V, IO = 100mA Input Voltage Vl(on) 3/4 3.0 3.0 1.4 1.1 3.0 VO = 0.3, IO = 5mA VO = 0.3, IO = 2mA VO = 0.3, IO = 1mA VO = 0.3, IO = 5mA VO = 0.3, IO = 10mA IO/Il = 10mA / 0.5mA IO/Il = 10mA / 0.5mA IO/Il = 5mA / 0.25mA IO/Il = 5mA / 0.25mA IO/Il = 10mA / 0.5mA Output Voltage VO(on) 3/4 0.1 0.3 V Input Current Il 3/4 3/4 56 68 68 80 30 -30 -20 3/4 3/4 3/4 3/4 3/4 3/4 250 0.36 0.18 0.88 3.6 0.88 0.5 mA VI = 5V Output Current IO(off) mA 3/4 VCC = 50V, VI = 0V VO = 5V, IO = 5mA VO = 5V, IO = 5mA VO = 5V, IO = 10mA VO = 5V, IO = 10mA VO = 5V, IO = 5mA 3/4 3/4 VCE = 10V, IE = 5mA, f = 100MHz DC Current Gain Gl DR1 R2/R1 fT 3/4 Input Resistor (R1) Tolerance Resistance Ratio Tolerance Gain-Bandwidth Product* * Transistor - For Reference Only +30 +20 3/4 % % MHz DS30350 Rev. 2 - 2 2 of 8 DCX (xxxx) K Electrical Characteristics PNP Section @ TA = 25C unless otherwise specified NEW PRODUCT Characteristic (DCX143TK & DCX114TK only) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector-Emitter Saturation Voltage DC Current Transfer Ratio Input Resistor (R1) Tolerance Gain-Bandwidth Product* Characteristic DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE DR1 fT Min -50 -50 -5 3/4 3/4 3/4 100 -30 3/4 Typ 3/4 3/4 3/4 3/4 3/4 3/4 250 3/4 250 Min -0.5 -0.5 -0.3 -0.5 -0.5 Max 3/4 3/4 3/4 -0.5 -0.5 -0.3 600 +30 3/4 Typ -1.1 -1.1 3/4 3/4 -1.1 -1.9 -1.9 3/4 3/4 -1.9 Unit V V V mA mA V 3/4 % MHz Max 3/4 V Unit Test Condition IC = -50mA IC = -1mA IE = -50mA VCB = -50V VEB = -4V IC/IB = 2.5mA / 0.25mA IC/IB = 1mA / 0.1mA 3/4 VCE = -10V, IE = 5mA, f = 100MHz Test Condition DCX143TK DCX114TK IC = -1mA, VCE = -5V Symbol Vl(off) VCC = -5V, IO = -100mA Input Voltage Vl(on) 3/4 -3.0 -3.0 -1.4 -1.1 -3.0 VO = -0.3, IO = -5mA VO = -0.3, IO =- 2mA VO = -0.3, IO = -1mA VO = -0.3, IO = -5mA VO = -0.3, IO = -10mA IO/Il = -10mA / -0.5mA IO/Il = -10mA / -0.5mA IO/Il = -5mA / -0.25mA IO/Il = -5mA / -0.25mA IO/Il = -10mA /- 0.5mA Output Voltage VO(on) 3/4 -0.1 -0.3 V Input Current Il 3/4 3/4 56 68 68 80 30 -30 -20 3/4 3/4 3/4 3/4 3/4 3/4 250 -0.36 -0.18 -0.88 -3.6 -0.88 -0.5 mA VI = -5V Output Current IO(off) mA 3/4 VCC = 50V, VI = 0V VO = -5V, IO = -5mA VO = -5V, IO = -5mA VO = -5V, IO = -10mA VO = -5V, IO = -10mA VO = -5V, IO = -5mA 3/4 3/4 VCE = -10V, IE = -5mA, f = 100MHz DC Current Gain Gl DR1 R2/R1 fT 3/4 Input Resistor (R1) Tolerance Resistance Ratio Tolerance Gain-Bandwidth Product* * Transistor - For Reference Only +30 +20 3/4 % % MHz Ordering Information (Note 2) Device DCX124EK-7 DCX144EK-7 DCX114YK-7 DCX123JK-7 DCX114EK-7 DCX143TK-7 DCX114TK-7 Notes: Packaging SC-74R SC-74R SC-74R SC-74R SC-74R SC-74R SC-74R Shipping 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 2. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. DS30350 Rev. 2 - 2 3 of 8 DCX (xxxx) K Marking Information NEW PRODUCT XXX Date Code Key Year Code Month Code Jan 1 2002 N Feb 2 2003 P March 3 Apr 4 XXX = Product Type Marking Code See Sheet 1 Diagrams YM = Date Code Marking Y = Year ex: N = 2002 M = Month ex: 9 = September 2005 S May 5 Jun 6 Jul 7 2006 T Aug 8 2007 U Sep 9 2008 V Oct O Nov N 2009 W Dec D 2004 R DS30350 Rev. 2 - 2 YM 4 of 8 DCX (xxxx) K NEW PRODUCT TYPICAL CURVES - DCX123JK PNP SECTION VCE(SAT), MAXIMUM COLLECTOR VOLTAGE (V) 250 PD, POWER DISSIPATION (mW) 1 IC/IB = 10 200 0.1 25C 75C -25C 150 100 0.01 50 0 -50 0 50 100 150 TA, AMBIENT TEMPERATURE (C) Fig. 1 Derating Curve 1000 0.001 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC 12 IE = 0V hFE, DC CURRENT GAIN (NORMALIZED) VCE = 10 10 75C COB, CAPACITANCE (pF) 8 6 4 2 0 -25C 25C 100 10 1 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 75C VO = 5V 25C 0 100 5 10 15 20 25 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 10 VO = 0.2 100 IC, COLLECTOR CURRENT (mA) 10 -25C Vin, INPUT VOLTAGE (V) -25C 1 1 75C 0.1 25C 0.01 0.001 0 1 2 3 4 5 6 7 8 9 10 Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current Vs. Input Voltage 0.1 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current DS30350 Rev. 2 - 2 5 of 8 DCX (xxxx) K NEW PRODUCT TYPICAL CURVES - DCX123JK NPN SECTION VCE(SAT), MAXIMUM COLLECTOR VOLTAGE (V) 250 1 IC/IB = 10 PD, POWER DISSIPATION (mW) 200 0.1 75C -25C 25C 150 100 0.01 50 0 -50 0 50 100 150 TA, AMBIENT TEMPERATURE (C) Fig. 1 Derating Curve 1000 0.001 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC hFE, DC CURRENT GAIN (NORMALIZED) VCE = 10 4 IE = 0mA 75C COB, CAPACITANCE (pF) 3 -25C 25C 100 2 1 0 10 1 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 75C VO = 5V 25C 0 100 5 10 15 20 25 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 10 VO = 0.2 100 IC, COLLECTOR CURRENT (mA) 10 -25C 1 Vin, INPUT VOLTAGE (V) -25C 1 0.1 75C 25C 0.01 0.001 0 1 2 3 4 5 6 7 8 9 10 Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current Vs. Input Voltage 0.1 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current DS30350 Rev. 2 - 2 6 of 8 DCX (xxxx) K NEW PRODUCT TYPICAL CURVES - DCX114TK PNP SECTION VCE(SAT), MAXIMUM COLLECTOR VOLTAGE (V) 250 PD, POWER DISSIPATION (mW) 1 IC/IB = 10 200 0.1 75C 25C -25C 150 100 0.01 50 0 -50 0 50 100 150 TA, AMBIENT TEMPERATURE (C) Fig. 1 Derating Curve 1000 0.001 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC hFE, DC CURRENT GAIN (NORMALIZED) VCE = 10 75C 12 IE = 0V 10 25C -25C COB, CAPACITANCE (pF) 100 8 6 4 2 0 10 1 1 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 75C 0 100 5 10 15 20 25 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 10 VO = 0.2 100 IC, COLLECTOR CURRENT (mA) 25C 10 Vin, INPUT VOLTAGE (V) -25C 1 -25C 1 75C 25C 0.1 0.01 0.001 0 1 2 3 4 5 6 7 8 9 10 1 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current Vs. Input Voltage DS30350 Rev. 2 - 2 7 of 8 DCX (xxxx) K NEW PRODUCT VCE(SAT), MAXIMUM COLLECTOR VOLTAGE (V) 250 PD, POWER DISSIPATION (mW) TYPICAL CURVES - DCX114TK NPN SECTION 1 IC/IB = 10 200 0.1 150 75C -25C 25C 100 0.01 50 0 -50 0 50 100 150 TA, AMBIENT TEMPERATURE (C) Fig. 1 Derating Curve 1000 75C VCE = 10 0.001 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC 4 IE = 0mA hFE, DC CURRENT GAIN (NORMALIZED) COB, CAPACITANCE (pF) -25C 100 25C 3 2 10 1 0 1 1 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 100 0 5 10 15 20 25 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 10 VO = 0.2 100 75C IC, COLLECTOR CURRENT (mA) 25C 10 Vin, INPUT VOLTAGE (V) -25C 1 -25C 75C 25C 1 0.1 0.01 0.001 0 1 2 3 4 5 6 7 8 9 10 1 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current Vs. Input Voltage DS30350 Rev. 2 - 2 8 of 8 DCX (xxxx) K |
Price & Availability of DCX124EK
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |